Post-Construction Cleaning in Riverview, FL for New Builds and Remodels
The work is finished, but the dust isn't. We clear construction dust and fine debris from floors to fixtures so your new space is ready to live or work in.
Construction Dust Goes Where a Normal Clean Never Looks
Cutting drywall, sanding joint compound, and sawing tile all throw off powder fine enough to float. It rides the air through the whole building, not just the room being worked on, and it settles on anything flat.
That's why post-construction cleaning in Riverview, FL is its own kind of job. After a remodel we find dust on air vent covers, along the tops of door frames, on the shelves of brand new cabinets, on window sills, and on the lip of every baseboard. New builds around here add sand and red clay tracked in from the lot.
A regular clean won't touch most of that. A quick pass with a mop or a dry duster smears the powder or sends it back into the air, and it lands again by evening. Getting it out takes a different order of work and a lot more patience.
High to Low, So Dust Is Removed and Not Just Moved
Gravity decides the order. Anything we knock loose falls, so we start at the ceiling and finish at the floor.
- Step 1
High surfaces and fixtures first
We begin with ceiling fans, light fixtures, vent covers, the tops of cabinets, and the ledges above doors and windows. This is where the heaviest layer sits, and it has to come down before anything below is cleaned.
- Step 2
Walls, doors, and trim
Next we dust walls and wipe doors, door frames, window casings, outlet covers, and baseboards. Fresh paint gets a gentle touch so the finish isn't marked.
- Step 3
Cabinets, inside and out
Every cabinet, drawer, and closet shelf is vacuumed and wiped inside, then the fronts and hardware are cleaned. Sawdust left in a drawer ends up on your silverware.
- Step 4
Counters, fixtures, and glass
Counters, sinks, tubs, faucets, mirrors, and the inside of the windows are cleaned of dust, fingerprints, and installer smudges.
- Step 5
Floors last
Once everything above is done, we vacuum edges and corners, then vacuum and mop the full floor. Fine dust often takes a second pass before the mop water stays clear.
The Full Scope of a Construction Cleanup
This is what we cover on a typical after renovation cleaning. Tell us about your project when you call and we'll confirm the scope for your space.
Surfaces and fixtures
- Ceiling fans and light fixtures dusted, then wiped
- Vent covers and air returns cleared of drywall dust
- Tops of door frames, window casings, and trim
- Doors, handles, hinges, and outlet covers
- Baseboards and shoe molding cleared of settled dust
- Closet shelving and rods
New kitchens and baths
- Insides of new cabinets and drawers vacuumed and wiped
- Cabinet doors, drawer fronts, and hardware
- Counters, backsplashes, and sinks
- New appliances wiped inside and out
- Tubs, shower tile, and shower glass
- Toilets, faucets, and mirrors
Interior windows and sills
- Interior window glass cleaned
- Window sills and frames wiped
- Blinds and shutters dusted, if already installed
Floors
- Edges, corners, and stair treads vacuumed first
- Tile, wood, and vinyl vacuumed, then mopped, with a repeat pass where needed
- New carpet vacuumed thoroughly
- Closet and pantry floors
- Thresholds and door sills wiped
Large debris, scrap material, and haul-away are best handled by your contractor before we arrive. Once the big stuff is gone, we'll take care of the dust and fine debris left behind.
Post-Construction Cleaning in Riverview, FL for Every Kind of Project
New Home Builds
A new build final clean happens after the last trade leaves and before you move in. We clear the dust film from every room, cabinet, and closet so the house feels new, not just finished.
Kitchen and Bath Remodels
Tile cutting and cabinet installs make a surprising mess for 1 room. We clean the remodeled space in full, then chase the dust that drifted into the hallway and the rooms next door.
Additions and Whole-Home Renovations
When most of the house was a work zone, every room needs the full treatment. We go room by room and close each one out so nothing gets tracked back into a finished area.
Commercial Build-Outs
Offices, salons, and small storefronts need to be dust free before furniture, stock, and customers arrive. We bring extra hands on larger spaces so the clean fits your opening timeline.
Working With Homeowners, Contractors, and Builders
Some of our calls come from homeowners standing in a new kitchen they can't use yet, because everything is coated in white powder. Others come from contractors and builders who want to hand over a project that looks as good as the work they put into it.
Either way, the schedule matters more than anything. The clean should happen after the last trade is done: after the painter's touch-ups, after the electrician hangs the final fixture, after the flooring crew packs up. If someone sands or cuts after we leave, the dust is back and the clean didn't stick.
If you're a contractor, share your punch list dates and we'll plan around them. If you're a homeowner, ask your builder when the work will truly be complete, then call us. We're licensed and insured, and we take on builder clean jobs in Riverview and the nearby communities we serve: Ruskin, Apollo Beach, Sun City, Brandon, Palmetto, and Parrish.
Post-Construction Cleanup Near You
Questions About Cleaning Up After Construction
Don't see your question? Just call or text. We're happy to help.
When in the project should I schedule the clean?
At the very end, after every trade has finished and the contractor has removed tools, materials, and large debris. That includes paint touch-ups and punch list items, since even a small sanding job creates new dust. Call us when you have a likely finish date, and we can pencil in a day and adjust if the project runs long.
Will dust come back after you clean?
Some can. Fine construction dust hangs in the air and sits inside ductwork, and it may keep settling for several days after the work stops. Changing your AC filter right after the clean helps a lot, and swapping it again a few weeks later is smart. A light dusting during the first week usually takes care of whatever settles.
Can you clean after a single-room remodel, or only whole houses?
Both. A bathroom or kitchen remodel is a smaller job, but we still suggest letting us check the adjoining rooms, because dust rarely stays behind the plastic sheeting. Whole-house renovations and new builds take longer, and the quote reflects the square footage and how heavy the dust is.
Do you remove construction debris?
We don't. Lumber scraps, drywall pieces, tile boxes, and anything that needs a dumpster or a trailer are your contractor's job, and it's best if they're gone before we arrive. We handle what's left after that: dust, fine debris, smudges, and residue on surfaces from floors to fixtures.
Can you clean a commercial space before it opens?
Yes. We clean salons, offices, gyms, small stores, and medical offices after a build-out, before furniture, inventory, and customers arrive. We can arrange an after-hours visit while the space is empty; tell us when the work will be finished and how we'll get in. Once you're open, we also offer routine commercial cleaning.
Let's Take Care of the Construction Dust
Tell us about your new build or remodel and when the work is expected to finish. Call or text for a free quote, or book online once you have a finish date.